Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Replacing Rear Main Seal w/Engine in car [Archive] - StangBangerz Forums
PDA

View Full Version : Replacing Rear Main Seal w/Engine in car


Katmandu
06-30-2007, 07:04 AM
Is this possible to do ?? :confused:

If so, how difficult is it to do ?? :confused:
mustangrfast88
06-30-2007, 07:37 AM
need alittle more info on the car but if it is on a mustang it can be done because it is a one peice seal and you just got to drop the transmission and take off the flywheel or flexplate if i remeber right
Katmandu
06-30-2007, 07:46 AM
need alittle more info on the car 91 GT 5.0. :bigthumb
dedpedal
06-30-2007, 08:28 AM
Its simple but you do have to either drop the trans or at least move it back far enough to remove the flywheel and engine plate. Make sure to get a double lip seal for it.
kennebellcobra
06-30-2007, 08:38 AM
Also make sure you seal the flywheel bolts or you will still have a leak. I always put blue locktite on the tip of the threads and black rtv towards the head.
Katmandu
07-01-2007, 04:51 AM
Also make sure you seal the flywheel bolts or you will still have a leak. I always put blue locktite on the tip of the threads and black rtv towards the head.Good tips. :bigthumb

Thanks guys. :cool2:
theyallslow
07-01-2007, 11:15 AM
it can be done and they made some very good point. its not hard to do. but good luck.