junk89lx
06-21-2007, 09:19 PM
Well i picked up a pretty clean 93 coupe last week and have decided to sell my 88lx . was going to swap everything over to the coupe but just gonna start over..its an 88 lx hatchback 5.0 ,has been converted to aod(pedals everything) it is mass air and in primer white with black interior(out of a later model)but dash is still red and console was painted...
HAS
sub frame connectors (welded)
power locks and windows/cruise was a a/c car
ram air hood
new kyb struts and shocks
new lowering springs(purple but cant remember the name)
new bbk un equals
new mac h-pipe new
3 core radiator
bbk cold air intake
75mm pro-flow mass air meter
b&m hammer shifter
flowmasters with turn downs
pulleys
FMS cobra valve covers
140 speedo
a9p computer
--------------------------------
parts not on car-
explorer intake
bbk 70mm throttle body and spacer
lower g-load brace???
have felpro intake gaskets
extra oil pan and gaskets
new power steering hose
----------------------------------
car has no rust but has an ass print dent in roof
car holds low oil pressure i had a buddy swap motors awhile back but used the pan on the car which has a dent in it ....car runs fine been driving from dayton to middletown daily...dont know if pan is the cure or not but it was
suggested to me...kickdown cable is cracked so it shifts funny sometimes and power steering hose leaks at the pump but i have a new one.....would like to get $2200.00 O.b.o. may take a running 87-88 turbo coupe in trade body condition not important and will try and get pics up this weekend
HAS
sub frame connectors (welded)
power locks and windows/cruise was a a/c car
ram air hood
new kyb struts and shocks
new lowering springs(purple but cant remember the name)
new bbk un equals
new mac h-pipe new
3 core radiator
bbk cold air intake
75mm pro-flow mass air meter
b&m hammer shifter
flowmasters with turn downs
pulleys
FMS cobra valve covers
140 speedo
a9p computer
--------------------------------
parts not on car-
explorer intake
bbk 70mm throttle body and spacer
lower g-load brace???
have felpro intake gaskets
extra oil pan and gaskets
new power steering hose
----------------------------------
car has no rust but has an ass print dent in roof
car holds low oil pressure i had a buddy swap motors awhile back but used the pan on the car which has a dent in it ....car runs fine been driving from dayton to middletown daily...dont know if pan is the cure or not but it was
suggested to me...kickdown cable is cracked so it shifts funny sometimes and power steering hose leaks at the pump but i have a new one.....would like to get $2200.00 O.b.o. may take a running 87-88 turbo coupe in trade body condition not important and will try and get pics up this weekend