idle issues after cam installation

[Pitviper1996]

installed a tfs1 cam in my 94 now idle flucuates and sometimes surges at complete stop and idle. Is there anyway to someway control this issue a little bit?

[331TwistedWedge]

installed a tfs1 cam in my 94 now idle flucuates and sometimes surges at complete stop and idle. Is there anyway to someway control this issue a little bit?

you can idle your car up to about 1000 rpms (idle screw) that should keep it running ... the computers on those 94-95's are impossible to work with, well ok hard to work with ... a tune from md would come in handy (over ride that 94-95 computer) :bigthumb

i had surge on my 91 with the same cam, but it straightened itself out after a day of driving ...

[Pitviper1996]

ya this is about week 2 and it wont stop lol maybe your right a little tuning action would do it good

[RACEME]

Read here.

http://www.sn95forums.com/forum/index.php?topic=9600.0

The 94/95 computers are a pain in the butt, but they can work if you learn how they like to be talked to.