need help 2.3 urbo ranger

[toymaker]

Ok here is the problem,its a 1987 ranger that i converted to a 2.3 turbo out of a turbo coupe i have changed the computer to a mercur already and had it running.I went out and started and i just died and now i have no ignition no radio nothing.Didnt know if there is a relay or control box that could cause this or if i have a wire issue.

Thanks cary

[dedpedal]

I dont know if this will help but on my 2.3 t conversion, it burnt the relay for the fuel pump which is in a box on the passinger side strut tower. I lost a bunch of electricals. I moved the relay box and put a cheap shiled over it and things were fine after that. Good Luck!

[toymaker]

ill give that a try and see what happens thanks.

[Kevin Doe]

Yes, there is a relay box that several relays are contained in. It could have been one of those.

Good luck with it. About 5 or 6 years ago I did a 88TC swap into a 94 Ranger. Ended up putting down 300 whp and 350 wtrq. It was a fun truck.