90-93 intake on sn 95 car?

[Pitviper1996]

i got this 94 vert and this guy has a fox upper intake on it without the elbow. Car runs fine just curious if this will cause any issues.

[RACEME]

No, that is a common swap. I am doing it to my 95 very soon. Take a look here.

http://www.sn95forums.com/forum/index.php?topic=8331.0

[dedpedal]

No, that is a common swap. I am doing it to my 95 very soon. Take a look here.

http://www.sn95forums.com/forum/index.php?topic=8331.0

Tim, does the tps wiring have to be spliced or can the plug for a fox be repinned to the sn95 wiring? On my coupe, the turbo 4 swap instuctions said to cut and splice, but I noticed that the wire ends were the same so I removed them from the mass air meter and repinned the vam meter plug that was on the turbo coupe.

[RACEME]

every one I have seen shows that you cut and splice from the 94/95 wiring to the fox tps connector. If the pins are the same style, I don't see why you couldn't just swap em. I will make a little project thread when I do it.

[Pitviper1996]

ok i checked it out he does have the tps spliced but theres no vaccum tree from a fox and the throttle linkage is rigged with the sn 95 bracket so i guess ill havta ta get a fox cable and hardware to make it good. thanks for the help guys

[RACEME]

If there is no vaccum tree, where is the line to the fuel pressure regulator coming from?

You can also get the cruise to work again with a fox cruise control cable.

[Pitviper1996]

ill havta check today where the fuel pressure reg hose is running from i know its there just not sure what its connected to.