Wilwood Six Piston Calipers/Rotors, SN95 Mustang

[Gene]

Set of six piston Wilwood Superlites with mounting brackets for SN95 chassis. Also included stainless steel brake lines.

Rotors in good condition, plenty of life left. Pads have only two weekends on them, but should probably be replaced.

Also have a set of SN95 spindles that I'll throw in on the deal if someone wants to use them on a Fox chassis car.

MSRP new at Summit is $1689.00

Asking $1300.

http://pic20.picturetrail.com/VOL76/711321/1199444/13949351.jpg

[5.0calypso93lx]

Man would I love to have those :eek:

How do those perform on the street? What size rotors?

[Gene]

Quite well, actually. The 'D' compound pads that I have are a bit noisy and throw a lot of brake dust, but they do work very well even when cold. There are a ton of pad options out there for these calipers, from a lot of manufacturers, so you should be able to find a good street biased pad for them.

13" Rotors. They will clear 98 Cobra, 95 Cobra R, 03/04 Cobra and Steeda Ultralight/Konig Villain 17" wheels without a problem. They WILL NOT fit 17" Bullets.

All 18" wheels should fit without a problem.

[5.0calypso93lx]

Quite well, actually. The 'D' compound pads that I have are a bit noisy and throw a lot of brake dust, but they do work very well even when cold. There are a ton of pad options out there for these calipers, from a lot of manufacturers, so you should be able to find a good street biased pad for them.

13" Rotors. They will clear 98 Cobra, 95 Cobra R, 03/04 Cobra and Steeda Ultralight/Konig Villain 17" wheels without a problem. They WILL NOT fit 17" Bullets.

All 18" wheels should fit without a problem.

Not even the 17x9 aftermarket Bullits?

[Gene]

Not even the 17x9 aftermarket Bullits?

I don't know, honestly. The did not fit the stock Bullits on my 01 GT. They didn't clear them about about 2cm. It depends on the offset. You may be able to make them work with a spacer.

[Foxxx5oh]

do i guess sliding them in under my 16" SVO wheels would be a problem too...lol

[Black Hole]

How do those perform on the street?
I drove Gene's 01 when they had these on them.....I believe the term to answer your question is....

...it feels like the hand of GOD just reached down and grabbed hold...

:cool1:

And YES Gene, I still remember when Ken set me up and I stalled the damn car in front of everybody at Hooters....

[Gene]

And YES Gene, I still remember when Ken set me up and I stalled the damn car in front of everybody at Hooters....

I wasn't even going to say anything about that. :D

You know, these brakes would be awesome on your Cobra. ;)

[Black Hole]

I wasn't even going to say anything about that. :D

You know, these brakes would be awesome on your Cobra. ;)
Yeah....but I'd have to drive it then to take advantage of all that stopping power.

We both know that I don't drive the car. ;)

[OrangeStang04]

Ohhh damn.... I am very tempted... it is either these or the Roush Brake kit......

I'll let you know Gene!!