Need parts for the Stangbangerz.com Pinks Build please help if you can

[89notch]

I know this list seems very long but I'm listing everything we need and I'm sure we will come up with most of the things very quickly. I will update the list as we collect the parts. If you have something you donate need and want to donate it even though its not on the list we will sell the items on Ebay and use the cash to purchase what we do need.

I Understand that most of these parts people will not have laying around to give away and I will be trying to get these donated from the manufactures but I just put the entire list up so if anyone knows any Vendors that they might be able to get it donated through.


Needed Parts:

MOTOR PARTS
Mass Air Computer and Harness
SCT Chip
Throttle BodyDeal Pending
302 aftermarket intake-Deal Pending
Any type of aftermarket heads(deal pending)
Rocker Arms 1.6 or 1.7
Cam prefer an F cam
Valve Covers
Motor mounts
Headers-Unequal length to make turbo headers
MLS Headgaskets
ARP Head Studs
Stock 302 oil pan
Valve springs for GT40 P heads

Suspension
Wheels and tires-Pending
8.8 Rear end
3:55 gear
Driveshaft safety loop
Subframe connectors
Shocks and struts
31 spline Axles
Roll cage 6 point
5 point racing harness
Any type of brake parts Like disk brake conversion parts
Upper and lower control arms
Anti roll bar

Transmission
C-4 Shifter
C-4 converter
C-4 Shifter cable



Turbo Parts
T-70 Turbo
Any type of t-4 turbo flanges
Intercooler
Any type of 3 inch or 2.5 inch tubing

Fuel Components
Braided fuel lines or pushlock hose
AN Fittings for hose
Aftermarket fuel pressure regulator for aftermarket fuel system
A-1000 or similar fuel pump
Fuel Injectors 42lb or larger
Mass air meter for 42lb or larger
Fuel Rails
Fuel Filter
Fuel Cell at least 5 gallon



Ignition
Aftermarket Coil
MSD Box or similar




MISC Stuff
Aftermarket aluminum radiator and electric fan
Gauges Fuel pressure,Oil Pressure,Tach
Alternator
Starter


A Big thanks to the following

Parts Already Donated

1988 Mustang Coupe-CRC Automotive Carlisle Ohio (937)743-9826
Fresh C-4-Kelly 89notch
Reverse manual Valve Body-replica Cobra J Riley
50 oz flexplate-replica cobra J riley
28oz flywheel-93hulk Mark Riley
Misc Sensors-89notch and 93 hulk
46mm wastegate and 56mm Blow off valve-JGS Turbo
Timing Set-93 hulk
31 spline Traction lock-Brian IBstroken
Possibly GT40p Engine Complete-Car Connection Ohio
Misc Engine Gaskets-Mark 93hulk

[93hulk]

I have a battery for the car also.:)

[Gearhead]

I have solid motor mounts, valve covers, and oil pan that I can donate !!!
Let me dig around in the garage for some other parts.....

Scott

[Carl]

I got an oil pan. Tell me where to send it to.

[Black92LX]

you are using a a 4 cylinder car right???

I have the front and rear sway bars from a turbo coupe. The front bar is thicker and the rear didn't come on the 4 cylinders. I have both of those if you want them.

[Carl]

you are using a a 4 cylinder car right???

I have the front and rear sway bars from a turbo coupe. The front bar is thicker and the rear didn't come on the 4 cylinders. I have both of those if you want them.
Don't need a front sway bar on a drag car...

[89notch]

I have solid motor mounts, valve covers, and oil pan that I can donate !!!
Let me dig around in the garage for some other parts.....

Scott

Cool I knew everyone would chip in to help build this car.

[ibstrokin]

I also have a truck lower, If someone has a matching performance upper. I have a set of stock valve covers that my brother(tz250) can write script in the top with his cnc. I can probably get us a hook up on the rear end assembly.

[89notch]

I also have a truck lower, If someone has a matching performance upper. I have a set of stock valve covers that my brother(tz250) can write script in the top with his cnc. I can probably get us a hook up on the rear end assembly.

Good deal see what you can do.

[mailman]

I have stock springs and retainers from a set of GT40P heads, if they are good enough. If interested let me know and I will check pressures.

I also have a set of fuel rails.

PM me and we can arrange pickup/ delivery.

[WCKDGT]

black venom offers his welding services. he specializes in thin gauge stainless and aluminum and tig welding and he works in a machine shop, so he can get material

[mustangboy]

I know its not much but I know I have a nice autometer Pro comp ultra lite fuel pressure guage (0-100psi)that also has a bunch of braided line and isolator. I may have other stuff I'll just need to dig around and see what I have extra.

[Drivermod]

I've got a 3.55 gear and some misc. 3" tubing bends.

[mustangoutlaw]

I have a fuel cell! Maybe some other stuff I let ya know!

[89notch]

Ok little Update on the parts

Fuel cell-Mustangoutlaw-Jimmi fields
Fuel rails-Mustangoutlaw
Roll cage and fabrication-Rigid Race Cars

[1992MustangDW]

Not that it helps out a bunch But I have a brand new boost guage u can have, who do I give it to?

[Dirtyd0g]

24 or 26 spline converter? I have an 8 inch unit that I could repair for it.
Alan

[dedpedal]

I have a shifter and a core c4 to donate. I also have a set of oldschool slapper bars if you think they would help.
Come get it
Kev

[MrsAPE]

*sends alan off to the garage and ebay to see what he can come up with*

[5.0calypso93lx]

Are you wanting rear discs? If you are willing to run sn95 length axles(depends on what wheels you're running) , I have disc brake axle brackets, dust shields, and brake line brackets. Might have some other stuff, let me check the shop on saturday and see what I have left.

[Timido]

I have

a new set of seat belts that are out of date.... Maybe the manufacture will reinspect them for free..

Transmission cooler that you wanted anyway.

[89notch]

I have

a new set of seat belts that are out of date.... Maybe the manufacture will reinspect them for free..

Transmission cooler that you wanted anyway.

What brand are they Tim I can get ahold of them and see

[Timido]

RCI Tell them they are datted 02 and have never been used all they would need to do is sew new dates on them and send use some stickers for the side of the car.

[MFIELD]

I forgot I have an 8.8 in the shed you can have. It will need brake lines and brakes.

[bobtsgt]

I have a set of stock upper and lower control arms from my 96GT you can have.

[jared]

well i was gonna sell some of this but if it can be used ill try to get it boxed.

KYB shocks and quad shocks.
possibly my rear eibach sportlines.
Fox 4 banger front springs

i figure you'll want a coilover setup but thought id offer. im pulling it off the car tomorrow.

[jared]

also have a C&L inlet tube sampler calibrated for 42's

[89notch]

More parts have been donated

Cage and chassis work donated by Rigid Race cars
Torque converter donated by PTC
8.8 from M field

[MFIELD]

When and where do you need it?

[89notch]

When and where do you need it?I will let you know probably when I take the car to Ridged Race cars next week or the week after

[Stangman]

Ive got some GT/LX body parts, anything in particular needed?

[snotzs135]

think i have a saftey loop need to dig around to make sure:cool1:

[92coupe]

I have a starter, alternator, heavy welding cable and the crimp on ends to move battery to the trunk. Might be able to come up with a flaming river switch also

[orangedemon331]

I have a battery box that I am not using, I'll have to think of some other things that I have!!:bigthumb

[89notch]

Good deal guys let me know what you find thanks

[mailman]

What about cash donations?
For all those forgotten parts that require Autozone runs...
PM contact info and I will throw in a few bucks.

[7721Cobra]

I have a Accel Super coil if you want it, Also I have oil pressure, and water temp mechanical gauges. Stewart Warner brand. Let me know I can bring over the stuff.

[kennebellcobra]

Don't know your plans on the control arms but I have a set of mac upper and lca that needs bushing in the uppers if your not going solid.

[Demented5oh]

i have a older set hooker unequal length shorties. I think they are pro comps, can't remember. But they are free if someone could just pick them from here in Dayton.

[MFIELD]

i have a older set hooker unequal length shorties. I think they are pro comps, can't remember. But they are free if someone could just pick them from here in Dayton.

If he wants them you could get them to me and i will deliver with the rear axle.

[ibstrokin]

Don't know your plans on the control arms but I have a set of mac upper and lca that needs bushing in the uppers if your not going solid.

depending on diameter of the hole, I may have some bushings for them.

[Demented5oh]

If he wants them you could get them to me and i will deliver with the rear axle.

That sounds good to me. Just waiting for a PM or something to know if they are needed or not

[replicobra]

hey, i just remembered i also have some sn95 rear springs. they are shorter and stiffer than a fox's. they picked my 60 fts up a tenth, by themselves. i'll throw them in.

[89notch]

A little update for everyone

I'm working with Dynamic Transmissions on putting together a C-4
I think JW is going to come through with an ultra Bell
Autometer said they would contribute gauges
SX is sending a regulator fuel pump and filters
VS Racing confirmed an intercooler and are still working on the masterpower T-70 turbo

The major hold up right now is the engine I'm waiting on some returned calls right now but hope to hear back today

[89notch]

Also Champion fiberglass just came through with a hood of our choice

[DeckerEnt]

Looks like everything is coming together well. Is there a date set for the race? When does the car need to be ready?
Keith

[Black92LX]

My Amsoil Connection is interested in possibly dontating some stuff.


I might be interested in providing all the lubricants for the car, let
me know exactly what you need and how it is going to work out. If you
guys pass my name out to get me out there, I would supply the oil,
tranny fluid, filter, gear lube and maybe throw in some mothers for it.
http://www.milwaukeesynthetics.com/

Just got the email from him. Also sent you PM so we can work out some details.

[rally]

hey if the car needs cleaned and polished after its all painted let me know.
( I detail cars)

[plated]

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car:bigthumb :cool1:

[93hulk]

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car:bigthumb :cool1:

Sweet. We got it all gutted the other night. Kelly is goin to post some pics when he gets a chance.

[89notch]

Timido came over last night and took the dash out of her its ready to go to rigid.

Also Trickflow came through big time by donating a set of "R" heads and a matching R lower and boxed upper intake. I have some pics I will post when I get home tonight

[Gregg@TFS]

That's right and this car better kick some butt!!!!!!!! I will be there when it happens so you guys better keep me posted on what is going on.

[BIZLE]

just talked to my buddy at smyth paint center in mt.carmel he is paying the bill for paint& material for the car:bigthumb :cool1:

i will help on the paint and body keep me posted chris:bigthumb

[Timido]

Last I heard a Fellow Stangbanger was really stepping it up in the Engine Compartment. Perhaps a little small block to put all that Trick Flow Bling on!!!

[FlatlineCowboy]

can we make cash donations for this? Possibly setup a paypal account where we can make deposits?

[89notch]

Last I heard a Fellow Stangbanger was really stepping it up in the Engine Compartment. Perhaps a little small block to put all that Trick Flow Bling on!!!

Yep our local dayton 5.0 has stepped up to the plate with a large donation of a complete shortblock for the car. I'm working on a write up for everyone that donated to the cause.

[Jeff88coupe]

Sweet...major kudo's to Mike for the shortblock. I was sitting here thinking of how a set of tfs-r's would fit on a stock explorer shortblock. Is it still going to be a 8.2" deck block.....or a 9.5? Those R's would be nice on a windsor.

[Timido]

Those Trick Flow heads will work Great on the little Small Block:)

[Timido]

There are alot of great people that are Giving alot of time and parts to this build. There have been several people asking about donating a few Bucks to the cause well this is what we have worked out. For the Cincinnati folks I have asked CincySpeed if they would keep a running Tab of Donations that we will be able to use for parts. All donations will go to parts for the build.

CincySpeed 513-821-2221

[BUHBYY]

I have a hurst quarter stick and cable and Trick flow valve covers to go on those sexy heads ....

[86NotchGT]

Kelly i have 3 2 1/2" 90 degree mandrel bends.It's not much but there yours if you can use them.Also some new 5 lug rotors.Let me know.

[89notch]

Kelly i have 3 2 1/2" 90 degree mandrel bends.It's not much but there yours if you can use them.Also some new 5 lug rotors.Let me know.

can use the 5 lug rotors and bends for sure. Thanks


We also need some 5 lug 31 spline c clip axles. We have a chance to trade the 31spline setup we have for a 33 spline spool setup.

[89notch]

UPDATED PARTS LIST

Parts Needed

7/16 rockers
Pushrods(unknown on length)
Complete engine gasket set
Oil pump
Oil pan
Powerglide driveshaft
31 spline 5 lug axles c clips
5 lug read disk brakes
5 lug front rotors and bigger brakes
Manual Rack and steering shaft
Misc gray interior parts Carpet door panels, seats etc
Maybe some aftermarket seats
Throttle Body
Injectors(60lbs) I think Mod Depot is working on these
A9l Harness and computer

And lots of other small things I will be adding later

[bobtsgt]

I have 96 GT single piston front calipers (still worked when pulled 1 week ago), rotors (probally need turned), 96gt rear pads and rotors with about 300 miles on them. do you need one seat or 2?

[89notch]

I have 96 GT single piston front calipers (still worked when pulled 1 week ago), rotors (probally need turned), 96gt rear pads and rotors with about 300 miles on them. do you need one seat or 2?

That will work great we will just have to find some rear backing plates and have them machined for the C clips elims

[quik lx]

I have a bunch of grey interior plastics parts and 1 good grey passenger side power door panel you can have.

[orangedemon331]

What about a K member and some A arms??????????? Also what about the battery box you still need one or not??

[89notch]

Have a complete UPR front and Rear suspension kit on the way I also have the battery box covered.

We do need front struts and rear shocks though

[Jeff88coupe]

I have my original stock grey carpet out of my coupe. I had Keith Decker clean it..don't look to bad. It just has a few cutouts for my 6pt bar. If you want it let me know..I'll get it dropped off at cincy speed.

[89notch]

Sure but I might want to pick that up I'm going to try to not clutter up craigs store with big stuff

[bobtsgt]

I'll drop off what I got at Craig's either tomorrow on Friday afternoon

[PonymanfiveO]

Im sure I have an extra A9L and a harness piece to turn a non mass air car into a mass air car. If you can get your hands on a non Mass air harness I'll gonate all if it.

[89notch]

Im sure I have an extra A9L and a harness piece to turn a non mass air car into a mass air car. If you can get your hands on a non Mass air harness I'll gonate all if it.

Anyone have a speed density harness? Looks like Matt is going to hook us up with the rest

[bobtsgt]

brake parts are at Cincy

[89notch]

brake parts are at Cincy

Great thanks anyone else have anything that will help?

[IWRBB]

I have 2 used Cobra rear rotors you can have. They look like they are in good shape. You'd need the right brackets to run the thicker rotors though. Something off a Mach 1 or a 94-98 Cobra. The Cobra have the same rear caliper as a GT though.

[89notch]

Bump anyone else

[ricmcusa]

F.Y.I as far as seats go. If you want something easy to install and fairly light 2000 cavalier seats bolt to the mustang tracks. They look good to. No one will ever know there from a chevy.

[89notch]

BUMP still need a lot of stuff the car must be complete and running before powerfest since the producers is coming to check the car out then

[plated]

any help will go along way you guy's.if u can donate any money or parts please do,this is a really big project and we need all the help that we can get

[01cobra]

I got lots of misc. pipe and mandrel bends for the hot side stuff. 2.25 2.5 3.0 3.5 and maybe a little 4.0 left.

[WCKDGT]

i have two stock front gray seats let me know if you want them and where to take or meet some one to pick them up. (driver side rack needs replaced)

[WCKDGT]

i can also get a lower intake gasket set (fel-pro)

[89notch]

We can use the bends if you have them PM me a number and I will try to meet up to pick them up. Pyskostang the seats would be great we want to run some cheap plastic buckets but money is tight on this project so we might have to use some stockers. Can you hold on to them from about 3-4 weeks and I will let you know

[WCKDGT]

yea they are just sitting in my buddy's garage. let me know if u need them

[DeckerEnt]

I think I have the speed density harness. I am in Michigan right now but will be back in Ky on sunday. I have to check the trunk of the vert. I will let Kevin know and he will get it to you or I could bring it to Cincy Speed.
Keith

[dedpedal]

I think I have the speed density harness. I am in Michigan right now but will be back in Ky on sunday. I have to check the trunk of the vert. I will let Kevin know and he will get it to you or I could bring it to Cincy Speed.
Keith
Taken care of Keith, Greg was at the shop when I got home so I dug it out of the vert and took it to Chris's place on the way home from dropping my car at Joes.

[DeckerEnt]

Thanks Kev. If you need anything else from the vert, just ask.
Keith

[91lxnos]

Have a complete UPR front and Rear suspension kit on the way I also have the battery box covered.

We do need front struts and rear shocks though

who has the suspension parts????? Dont we need them quick???

[bobtsgt]

brake stuff is still up at Cincy. do you still need it?

[Maximus]

Axles are here as well.

I checked on the PA belhousing, none of my suppliers sell it:(

[Jeff88coupe]

I've got a new RCI red poly seat with a black and red padded seat cover and universal fit seat brackets for the car if you want it Kelly.

[Timido]

I have 1 Black Jazz bucket seat with black cover. And a couple cut up stock seat brackets. We could Use black dye paint on Jeffs seat cover and spray paint the back of the red seat black to match them. I still have some S.E.M. stuff to make paint adhere to vinal/ plastic.

[89notch]

brake stuff is still up at Cincy. do you still need it?

Yep just havent had time to pick it up

[89notch]

Got the bellhousing today just need the adapter ring

[Maximus]

Got the bellhousing today just need the adapter ring

Isnt it on the PG??

[89notch]

BUMP Still need the adapter ring working on a driveshaft
interior parts
1.6 7/16th rocker arms
timing chain cover
timing chain
oil pump
throttle body
tranny cooler with an fittings
electric fans prefer to have two
Radiator

I think that is it for now and then its all small stuff

[89notch]

Isnt it on the PG??

Nope bo checked it

[mustangrfast88]

are you guys going to run a alternator

[89notch]

are you guys going to run a alternator

yea we still need one also

[mustangrfast88]

i got one from bo but it needs a pully i am going to buy a one wire hook up once since my harness is all messed up get with bo and find out if it will work for the car and it will be atleast the weekend before i can get it since it is at my dads but i live in middletown

[mustangboy]

I believe I have a timing chain cover and also an xtra electric fan. Just let me know if you need them.

[89notch]

Still need 5 lug SN95 spindles and rotors and calipers if possible Thanks Kelly We have a set of borrowed ones to get the car on the ground but they have to go back

[89notch]

Also still need some type of MSD ignition box

[89notch]

And some 7/16th 1.6 rockers, some type of weld wheels and tires, a 28oz balancer SFI approved

[89notch]

Got the balancer.

Still need the following

SFI 28 oz flexplate

10 in 6.5 back spacing wheels

28 x 10.5 ET Drags

Skinny wheels for the fronts

Lokar dipstick tube and lokar transmission tube for a powerglide

Flexplate bolts

More to come

[Timido]

What size are the flexplate bolts Grade 8 bolts should do the trick. Need a Battery also.

[Timido]

We need

Valve cover gaskets
Thermostat housing
Waterpump
I am sure there will be more.
Fluids, Type F or Mercon about a case,
Oil 10-30 10 quarts
2 Oil filters Fl1a or what works.
Gear Lube 80-90 ish couple quarts
Pinion seal.

Thank you all.

[Walter]

What size are the flexplate bolts Grade 8 bolts should do the trick. Need a Battery also.


I have have a perfectly good Motorcraft battery i can donate. Im in batavia and prolly cant drive out where the car is due to kid and work. I could drop it off to someone going up there tho. Lemme know.

[Timido]

Very Cool. Top post and I hope it fits the Battery box it is kinda tight. If you can drop it off at Cincy Speed I can pick it up or we can try to figure out a way to get to you.

[plated]

i'm going up thursday to help,bring the battery by the house if u want.i have a thermostat housing i'm sure

[Walter]

i'm going up thursday to help,bring the battery by the house if u want.i have a thermostat housing i'm sure

Ill drop it off bout noon on wed.

[dedpedal]

I have a set of valve cover gaskets. Can someone come by and get them?

[93hulk]

We also need a bronze dizzy gear.

[89notch]

Started a fresh thread please lock this on and sticky the other please

[89notch]

Still need an alternator and starter ASAP