Question about heads?

[93blackstang]

hey guys,
i have a 93 LX. what is the largest cam you can run on a factory shortblock with a 2.02 Alum. Head and 1.6 roller rockers? thanks

[331TwistedWedge]

hey guys,
i have a 93 LX. what is the largest cam you can run on a factory shortblock with a 2.02 Alum. Head and 1.6 roller rockers? thanks

2.02 valves ...... are these trick flow twisted wedge heads? ... because the answer will be nothing, unless you notch your pistons .......... the twisted wedge heads are the only heads that will work (2.02 valves) because of the staggered intake and exhaust valves .....

1.94 is about your max for the intake side and nothing over a .500 lift cam ... i would still double check ptv clearance ...........

[87stanger]

I have world windsor sr. with 2.02 valves , stock short block with E cam and its ok but dont know about goin any larger they say you can use the trick flow stage 1 and be okay

[89notch]

hey guys,
i have a 93 LX. what is the largest cam you can run on a factory shortblock with a 2.02 Alum. Head and 1.6 roller rockers? thanks

I know oyu can run a stock cam with 2.02 but you should still check Piston to Valve

[NXcoupe]

It could work, but you need to check your ptv clearance any time you change cams/combos