Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
Line loc plumbing [Archive] - StangBangerz Forums
PDA

View Full Version : Line loc plumbing


92coupe
03-06-2007, 10:44 PM
Does anyone have a diagram of how they plumbed there line loc? I am trying to figure it out with the paper that comes with it but cant really make heads or tales of it.
Rick93coupe
03-06-2007, 11:27 PM
This isn't mine, but I saw the picture one day and figured it would come in handy. Hope it helps!

http://i121.photobucket.com/albums/o238/Rick88coupe/propvalve.jpg
92coupe
03-06-2007, 11:46 PM
So it looks like you would have to run a new line to the front right??
Carl
03-07-2007, 12:54 AM
You should be able to just run the factory line to the outlet on the line loc, then put a new line from the inlet to the M/C or the pro valve.
quik lx
03-07-2007, 03:50 PM
I see what Brian is saying, the master cylinder (at least in both of my cars) has the left front line coming out of it's housing on the bottom, and then the lines coming out of the side go down to the proportioning valve. Out of the prop valve one line goes to the right front and the other goes to the rear. I'm curious if you just block the one in the housing and then put the solenoid in the front line out of the prop valve and run a new line to the left front? This picture above would indicate that since it doesnt show the line coming from under the body of the master cylinder?
quik lx
03-07-2007, 03:55 PM
Found this diagram, looks like you do block off that lower one. And run a new line to the left brake out of the soleniod.

http://www.crt-performance.com/linelok.htm
ponyboystroker
03-08-2007, 07:03 AM
are you using the install kit? I thought I would be slick and not buy the install kit and just piece it together with fittings from the local parts store. If it's not too late take it from me, buy the $20 install kit, you will save a lot of time and frustration.
quik lx
03-08-2007, 10:15 AM
are you using the install kit? I thought I would be slick and not buy the install kit and just piece it together with fittings from the local parts store. If it's not too late take it from me, buy the $20 install kit, you will save a lot of time and frustration.

Werd!:cool1:
92coupe
03-10-2007, 11:33 AM
Yeah i have both kits, lines and the fittings.
slvr87cpe
03-13-2007, 12:30 PM
thats what me and doug did was blocked off the bottom one coming out of the master cy. on our cars works great :bigthumb