Intake Manifolds

[Bluecrew07]

Looking for a new intake manifold anyone know what the choices are for a 2002 GT N/A? So far i think the one im gonna get is the typhoon intake

[Black92LX]

heard the typhoon is not so good.
What are you plans for the car. supposedly BBK has one coming out soon.

Here is another option that I would go with over the typhoon. HP is american made Typhoon is made in China. Chinese metal is not held to the same standards that metal used in the states is. So the possibility of cheaper aluminium in the intake is a concern of myself.
http://www.hiperformancesolutions.com/index2.html

I have seen no results from these intakes other than what the manufacturers state. Which I never go by they are always inflated one way or another. If you end up getting one please post up some results. I have a NPI motor and getting ready to do a PI intake swap. Not sure if i am going to keep the plastic or switch to one of the metal ones. Sure wish BBK would get their intake out they did a lot of great stuff for the 5.0.

[bobtsgt]

Josh I have a book I am reading with dyno back ups. The best one for a 2V besides the PI is a P51 all the way. The P51 showed inprovement in both HP at TQ through the graph. And if you put on a supercharger down the road the intake will be better since it flows more and has been design to balance the gains.

[Ranger50]

Trick Flow has a Bullitt copy now out on the market for $800.

[Black92LX]

Trick Flow has a Bullitt copy now out on the market for $800.

any links can't find this anywhere

[bobtsgt]

http://www.stangfreak.com/forums/viewtopic.php?t=2326

[cstreu1026]

The trick flow piece isn't exactly a bullitt copy. There are suppose to be some nice improvements of the ford part. I know they straightened out the number 5 intake runner. There is some questin though as to whether or not a supercharger will fit on the front of it.

[Ranger50]

any links can't find this anywhere


It's listed in the March/April 07 Summit catalog rag.

[Mr.Moontang]

Josh I have a book I am reading with dyno back ups. The best one for a 2V besides the PI is a P51 all the way. The P51 showed inprovement in both HP at TQ through the graph. And if you put on a supercharger down the road the intake will be better since it flows more and has been design to balance the gains.


I love mine and now the price has dropped as well...there are also used ones popping up now, keep your eyes peeled over on the depot.

[Bluecrew07]

The P51 wont fit my car with my hood i dont have a cowl hood...the trickflow one looks good but would it fit and where would the upper plentium go and would my 70mm throttle body work with it or would i have to get a bigger one

[Mr.Moontang]

sell the hood

[Bluecrew07]

but i like the hood and jenn said no way homie, plus its light weight and i dont have another hood

[nowrnty]

Go hoodless:lol:

[Bluecrew07]

hoodless? nah, now shirt less i could go for :D *ahem jenn*

[bobtsgt]

you can make the P51 fit. Just keep slamming the hood down til it forms a custom groove then hood pin it :lol:

[95vertstang]

I bought the typhoon and paid the extra for the polished one. It was not exactly what i expected. I was a little disappointed in the polishing department but it did help the car a bit although it was not what they advertise it to be. I guess one plus to the manifold is that you can disassemble the bottom half for easy port work. I would hold out for the newer intakes to see what they have to offer.

[Bluecrew07]

I really like the trickflow one and i like the p51

[Mr.Moontang]

I really like the trickflow one and i like the p51


Trick flow is not available yet per Summit even though its in the catalog...and you would not be able to use your throttle body. If you don't want to change your hood go with the Typhoon, you can get it in polished and we all know how much you like shiny things.

[Black92LX]

that trick flow looks like a nice peice.

Hoping i can just use some NPI to PI adapter plates and for the intake but will have to look into it a little more.

[Bluecrew07]

Trick flow is not available yet per Summit even though its in the catalog...and you would not be able to use your throttle body. If you don't want to change your hood go with the Typhoon, you can get it in polished and we all know how much you like shiny things.


i dont want the typhoon if people are saying its not like what they advertise. But i do like shiny things

[Black92LX]

here is some reading on the trickflow.
http://forums.modulardepot.com/4-6l-2v-tech/92066-new-trickflow-intake.html

[bobtsgt]

that trick flow looks like a nice peice.

Hoping i can just use some NPI to PI adapter plates and for the intake but will have to look into it a little more.

you can do it like most of us do it and just put the PI on the NPI heads many have done it with no problems. if you do the plates then it will raise the intake up and you may need a different hood. Livernoise sells the plates with its PI conversion but the intake itself is cut down to fit under stock hood.

as for the Typhoon its basically a looks thing. they do leave room to port which is a good idea to do since the gains aren't very much NA. mabey an extra 15 or so PA but I haven't seen any engine dyno #s yet. I don't think they really improved on the PI with the cross sections and the angels of the runners.

[Bluecrew07]

i just went to the trickflow website and couldnt even find the manifold that is suposed to be like the bullit one

[Bluecrew07]

who makes the P51 intake manifold i was gonna check them out but dont know the website

[Mr.Moontang]

who makes the P51 intake manifold i was gonna check them out but dont know the website

http://www.foxlakeracing.com/
foxlake racing 1-330-682-8800 ask for Ron and tell him I sent you. Right now the price for the complete kit is $1048.00 and trust me you want the complete kit...

[Bluecrew07]

if i had that much money and knew where to get a hood from then i would prolly say yea. did that come with the bottom part of the intake cuz i didnt see it

[bobtsgt]

it comes with upper/lower, shorter fuel rails and everything else to hook it up.

[Mr.Moontang]

You already have a throttle body and an elbow just get the Typhoon intake and save your self some money. With some additional porting or having the Typhoon extrude honed it would be fine for your car, anything is better than the plastic one...

[Black92LX]

if you do the plates then it will raise the intake up and you may need a different hood.
don't think a new hood is needed with the HP plates

[Bluecrew07]

You already have a throttle body and an elbow just get the Typhoon intake and save your self some money. With some additional porting or having the Typhoon extrude honed it would be fine for your car, anything is better than the plastic one...

what about this one? its already ported and it doesnt look bad at all

[Mr.Moontang]

what about this one? its already ported and it doesnt look bad at all

The invisible one....

[bobtsgt]

don't think a new hood is needed with the HP plates
it might be the strut tower bar then. I know livernoise cuts their PI intakes inorder to use the transer plates and still allow it to fit in stock measurments.

[Bluecrew07]

my bad...this one
http://www.hiperformancesolutions.com/index2.html

[Mr.Moontang]

my bad...this one
http://www.hiperformancesolutions.com/index2.html

This would be a good one for you, I was going to recommend to you over the Typhoon...

[Bluecrew07]

This would be a good one for you, I was going to recommend to you over the Typhoon...

I think i like this one. and it will either be this one or the bullit one depending one price and when it comes out, cuz i prolly not gonna get it until my tax refud

[theyallslow]

what are you wanting to do to the engine. you need to match your flow with your cams and your cams with your power band. dont just put stuff on the engine hoping that it will all work it self out. think and take your damn time.

[Bluecrew07]

what are you wanting to do to the engine. you need to match your flow with your cams and your cams with your power band. dont just put stuff on the engine hoping that it will all work it self out. think and take your damn time.

Beleive me i take my time i have stock cams and heads, i want to keep it N/A as much as possible. then eventually add a supercharger

[Brandon Alsept]

i dont want the typhoon if people are saying its not like what they advertise. But i do like shiny things

Feel free to stop by and look at one. We have one in stock at the shop, the polish looks good in my opinion.

[Bluecrew07]

Feel free to stop by and look at one. We have one in stock at the shop, the polish looks good in my opinion.

i do like shiny things and i have a black car so it will look good.but if it isnt like what they advertise then its poo. but ill come up and look at it where you located at. your sharonville right?

[vypastang]

if you plan on supercharging i say you just keep saving ur money, unless ur absolutely sure ur going centrifugal in the future then i guess go ahead, but wat if you decide you want a kenne bell? jmo

[mach_u]

i do like shiny things and i have a black car so it will look good.but if it isnt like what they advertise then its poo. but ill come up and look at it where you located at. your sharonville right?

2350 Alexandria Pike
Southgate KY 41071
859.746.1666
:bigthumb

[Brandon Alsept]

i do like shiny things and i have a black car so it will look good.but if it isnt like what they advertise then its poo. but ill come up and look at it where you located at. your sharonville right?


http://www.modulardepot.com/?show=contact

There ya go Map and all:bigthumb

[Bluecrew07]

ok i stop up in a bit or so

[Bluecrew07]

http://cgi.ebay.com/ebaymotors/Ford-Mustang-Bullitt-Intake-Manifold-Polished_W0QQcmdZViewItemQQcategoryZ36474QQihZ003Q QitemZ130078678578QQrdZ1QQsspagenameZWDVW

anyone know anything about this?

is the bullitt manifold different the the GT manifold

[cstreu1026]

From what I understand the Bullitt intake require quite a few extra parts to bolt it on. I am not sure that everything that you need is included in that auction. I am pretty sure you would at least need to buy a new alternator.

[Bluecrew07]

im pretty sure that im gonna get this one

http://www.hiperformancesolutions.com/index2.html

[Brandon Alsept]

im pretty sure that im gonna get this one

http://www.hiperformancesolutions.com/index2.html


The polished PRO Products is here for $675 and you will not have to pay shipping and handling charges;)

Plus you would be supporting local business:cool1:

[Mr.Moontang]

The polished PRO Products is here for $675 and you will not have to pay shipping and handling charges;)

Plus you would be supporting local business:cool1:

He is drawn to shiny things....:bigthumb

[Bluecrew07]

The polished PRO Products is here for $675 and you will not have to pay shipping and handling charges;)

Plus you would be supporting local business:cool1:

is that the same one? cuz i thought it was called HPS

[Brandon Alsept]

is that the same one? cuz i thought it was called HPS


No this is the pro products one. They are both basic copies of the PI intake with re-worked runner design. Both preform within a few % of each other and are both good products.

[Bluecrew07]

Is that one on display too i didnt get a chance to come up today im shooting for tomorrow tho

[Brandon Alsept]

Is that one on display too i didnt get a chance to come up today im shooting for tomorrow tho

Yeah it is in the show room:bigthumb

[NXcoupe]

I understand that the trick flow unit will allow you to use your stock GT throttle body, rails, etc., isn't that true? I think Cam told me that.

[cstreu1026]

that what I have read but I also read today that the release date has been pushed back until June now. I guess they are just wanting me to buy a P51.

[Bluecrew07]

The polished PRO Products is here for $675 and you will not have to pay shipping and handling charges;)

Plus you would be supporting local business:cool1:

How much would it be for you guys to port that too. and what will the hp be after its ported

[Brandon Alsept]

How much would it be for you guys to port that too. and what will the hp be after its ported

I will take it apart and see what I think there is left and get to you threw PM with a price;)

[Bluecrew07]

ok that sounds good cuz im pretty sure thats the one im gonna get

[PC02GT]

Release of the Trick Flow intake has been pushed back to June now

Anyone have actual experience with the HPS intake?

[Gregg@TFS]

Who told you guys June on our intake? As far as I know we are shooting for the first of April.

[cstreu1026]

taken from a thread on Modular Depot....

Called trickflow right now, and .....pushed back to June.
Can you believe it?

There are also rumors going around that it won't work with a centrifugal supercharger because of a reverse mounted alternator. Hopefully you can shed some light on that.

[Black92LX]

i have pretty much given up on the hopes of a good 4.6 intake.
Ohh well Kenne Bell here we come I guess.

[Gregg@TFS]

Don't believe rumors guys!!

[cstreu1026]

I saw yesterday that Summitt shows an available date of 3/7/07, now if only the price were a bit lower. Then again since I am planning on switching to a 4 Valve I guess it doesn't really matter any more.

[Bluecrew07]

Called summit and asked about clerance issues and they said that the trick flow will fit under any stock hood heights.

[Bluecrew07]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=TFS%2D51800002&N=700+4294908331+4294924642+4294822100+400098+4294 908282+115&autoview=sku

[Black92LX]

anyone know if you have to reverse the alternator yet??

[Bluecrew07]

http://i49.photobucket.com/albums/f291/hotlist/tf.jpg
pic of the Trickflow manifold on a 99Gt wit Stock TB