I need 351 windsor parts (lots)

[1992MustangDW]

here is what all it has, Ross Pistons, Oliver Rods, victor jr intake, Dart Heads, Roller rockers, balanced the whole nine yards, motor was dyno for 600hp,

Things I need.

Going to need a distributor, diff valve covers because these are dirt track ones, Water pump, I have a carb.I need a flywheel, Im running a 5 speed just because its gonna be a street car and wont hook so hopefully it wont break. I guess I will need pulleys and stuff unless I can use all of my 302 stuff. anything else anyone can think of for this swap into my fox, will my exhaust work on this from my 302, full mac prochamber exhaust?

[Carl]

The exhaust will fit except for the headers. You need specific 351 swap headers. Cincy Speed can get them, thats where I got mine. All the pulley's will work but you need a new bracket to mount your P/S and A/C if you run it. If you don't have a taller hood...get one. You will need at least 1" or so with solid motor mounts.

[chad393na]

Don't forget the oil pan/ pickup.

[Rick93coupe]

http://www.stangbangerz.com/forums/showthread.php?t=28366


This guys got a good deal on a oil pan.

[Rick93coupe]

The exhaust will fit except for the headers. You need specific 351 swap headers. Cincy Speed can get them, thats where I got mine. All the pulley's will work but you need a new bracket to mount your P/S and A/C if you run it. If you don't have a taller hood...get one. You will need at least 1" or so with solid motor mounts.


You could do that, or keep you setup together and sell it as a whole. I have a complete windsor exhaust with prochamber and 3" macs for sale. PM if your interested.

[1992MustangDW]

I have an oil pan and pump., i have a taller hood, 4 inch is that good enough? Do you know were I can get these brackets?... I guess the big thing is spark plugs, wires, distrib, do you know how I can reach them on the headers?

[1992MustangDW]

my motor mounts wont work? I have energy suspension mounts

[Rick93coupe]

my motor mounts wont work? I have energy suspension mounts

You motor mounts will work, but since the engine is 1" taller than the 302, it will stick out of the engine bay an extra inch. You can buy drop mounts that will drop the engine back down in the bay 3/4". You can also do it the ghetto way and buy k-member spacers, but I advise against that.

[Carl]

Plugs, wires and cap are the same as a 302. For your dizzy, you can just get one for a late model truck with the TFI module on the dist, not the one with the wires hanging off of it.

Are you planning on keeping your A/C and P/S?? If so, I have a bracket that may be for sale. I am not sure if I am going to be able to get rid of it yet though.

Who do you mean reach for the headers? Rick88coupe has a full exhaust setup if you want, or you can just get the headers to use with your current prochamber setup from Cincy Speed @ (513)821-2221. Craig will hook you up there.

[93 notch]

here is what all it has, Ross Pistons, Oliver Rods, victor jr intake, Dart Heads, Roller rockers, balanced the whole nine yards, motor was dyno for 600hp,

Things I need.

Going to need a distributor, diff valve covers because these are dirt track ones, Water pump, I have a carb.I need a flywheel, Im running a 5 speed just because its gonna be a street car and wont hook so hopefully it wont break. I guess I will need pulleys and stuff unless I can use all of my 302 stuff. anything else anyone can think of for this swap into my fox, will my exhaust work on this from my 302, full mac prochamber exhaust?

90 e 150 dis. from autozone 70.00:bigthumb

[1992MustangDW]

thanks everyone you have all been a huge help

[cheiff5]

i have alot of 302 351w motor parts what ever you need give me a call 513-383-6958